The STOP IT® Gas Riser Rehabilitation Kit is intended to strengthen the structural integrity of the riser nipple, or riser casing on non-leaking 3/4” and 1” standard anodeless risers. It is comprised of a strong knitted fiberglass tape coated with fast setting, water-activated urethane resins. The STOP IT® Gas Riser Rehabilitation Kit also includes FIX STIX®, a steel filled hand moldable epoxy that sets rock hard in only 20 minutes.
Materials The STOP IT® Gas Riser Rehabilitation Kit is a necessary item in an inventory of products for minimizing corrosion-related operating costs.
How It Works The STOP IT® Riser Rehabilitation Kit is intended to strengthen the structural integrity of the riser nipple, or riser casing on non-leaking 3/4” and 1” standard anodeless risers.
Kit Includes - Kit Contents:
Flexibility Improves efficiency of utility field personnel and has reliable installation quality that reduces shutdowns or relights.
Below you can view more information about The STOP IT® Pipe Repair System. If you have any questions, please call us today at 602-830-9400. For your convenience, click here to get a free quote from this site.
*Click on the Tabs to view more information.
Shelf Life: 2 years from date of purchase
Pressure Retention Capacity: Recommended for pressures up to 400 psi (28 kg/cm2, 27 bar)
Temperature/Heat Resistance: From -20°F up to 250°F (-29°C to 121°C) - continuous.
From 250°F to 500°F (121°C to 260°C) - intermittent
Set Time: Tack free in 3 - 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C)
Cure Time: Cures in 30 minutes at temperatures between 50°F to 80°F (1O°C to 27°C)
Tensile Strength: ASTM D 3039, 24,950 PSI / in width/172 MPa
Flexural Yield Strength: ASTM D 790-1-B, 12,005 PSI (844 kg/cm2)
Durometer Hardness: ASTM D 2240, 63 (Shore D)
Shelf Life: 2 years from date of purchase
Pressure Retention Capacity: Recommended for pressures up to 400 psi (28 kg/cm², 27 bar)
Temperature/Heat Resistance: From -20°F up to 250°F (-29°C to 121°C) - continuous. From 250°F to 500°F (121°C to 260°C) - intermittent
Set Time: Tack free in 3 - 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C)
Cure Time: Cures in 30 minutes at temperatures between 50°F to 80°F (10°C to 27°C)
Tensile Strength: ASTM D 6039, 24,950
Flexural Yield Strength: ASTM D 790-1-B, 12,005 PSI (844 kg/cm²)
Durometer Hardness: ASTM D 2240, 63 (Shore D)
TecSolutions Consultants is a valued supplier to the utility locating and leak detection industry in the Southwest.
If you have any questions, please call TecSolutions Consultants today at 602-830-9400. For your convenience, click here to get a free quote from this site.
Thank you for your interest in TecSolutions Consultants. We look forward to serving you in the near future.
Products Available: Pipe & Cable Locators, Leak Detection, Ground Penetrating Radar GPR, Drain & Sewer Line Jetting, Inspection Cameras, Sonde, Conduit Rodders, and Utility Management Marking Equipment.
© TecSolutions Consultants All rights reserved.
Website Design by Brymels LLC.
Service Area Back to top