Get back to production in minutes.
A leaking pipe can shut down production for hours, costing you valuable lost production. STOP IT® can have you back up and running in about 30 minutes. The STOP IT® Pipe Repair System fixes cracks and leaks in carbon steel, stainless, aluminum, copper, galvanized, PVC, CPVC, PVDF, polyethylene, polypropylene, fiberglass, and other pipes so you don't have to face the consequences of a shutdown until the pipe is replaced.
STOP IT® can be used almost anywhere - including underwater and in chemical and military facilities - to repair chemical, steam, process and water lines. It's an in-field repair system that can be quickly applied by one person, leaving other maintenance staff free to deal with other concerns.
*Click on the Tabs to view more information.
Shelf Life: Two years from date of purchase when stored at 40° to 83°F (5° to 28°C)
Color: White or black
Tensile Strength: 24,950 PSI / in width/172 MPa (ASTM D 3039)
Flexural Strength: 12,005 psi/82.77 MPa (ASTM 790)
Durometer Hardness: 63 (Shore D) (ASTM D 2240)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm2)
Temperature/Heat Resistance: From -20°F up to 250°F (-29°C to 121ºC) - continuous. From 250°F to 500° F (121°C to 260°C) - temporary exposures. If possible, the pipe should be at ambient temperature before application.
Set Time: Tack free in 3 to 5 minutes at ambient temperatures of 50°F to 80°F (10°C to 27°C). Set time is slower below 50°F and faster above 80°F.
Cure Time: at 1/2″ thick (1.27 cm) - 30 minutes at 50ºF to 80°F (10ºC to 27°C).
The Stop It® Pipe Repair System has been subjected to intensive testing and complies with US DOT 49CFR parts 192 and 195, and ASME PCC-2 article 4.1.
Generally, Stop It® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.
No visible changes in Stop It® after an immersion term of 35 days in the following chemicals:
Acetic Anhydride Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Hydrochloric Acid (10%)
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Xylenes, Mixed o-, m- and p
The Fix Stix™ Epoxy included with each kit is certified to NSF/ANSI 61 for Drinking Water.
Even under extreme pressures, the Stop It® Pipe Repair Tape will not shatter or crack. Stop It® releases pressures slowly.
When tested to the failing point in laboratory conditions, failure was indicated by a reduction in line pressure and seepage.
TecSolutions Consultants is a valued supplier to the utility locating and leak detection industry in the Southwest.
Thank you for your interest in TecSolutions Consultants. We look forward to serving you in the near future.
Products Available: Pipe & Cable Locators, Leak Detection, Ground Penetrating Radar GPR, Drain & Sewer Line Jetting, Inspection Cameras, Sonde, Conduit Rodders, and Utility Management Marking Equipment.