The Loc-150Tx, 150-Watt DM Transmitter is used primarily with the Defect Mapper (DM) Receiver, however it is also useful for those needing a low frequency, high output transmitter.
Typically, the Loc-150Tx, transmitter (DM transmitter) is used to apply a signal current to the anode bed. The pipeline returns the signal via coating faults back to the transmitter. The Loc-150Tx transmitter is designed to be powered from CP (Cathodic Protection) stations, AC or external batteries, eliminating the need for internal batteries. This transmitter has a direct connection mode to apply the locate frequency onto the conductor. There is no clamp or induction mode.
The Loc-150Tx transmitter has selectable direct connection frequencies from 98Hz to 512Hz (640 Hz in Europe). The two inch by one-inch dot matrix display with LED backlight shows output current, volts, frequency, and over voltage/over temperature/over power warnings.
Two rotary/push control knobs provide access to frequency selection, output level, menu information and active/standby modes. This transmitter is supplied with a direct connection lead, DC input lead and AC mains lead.
*Click on the Tabs to view more information.
Links to PDFs:
TecSolutions Consultants is a valued supplier to the utility locating and leak detection industry in the Southwest.
Thank you for your interest in TecSolutions Consultants. We look forward to serving you in the near future.
Products Available: Pipe & Cable Locators, Leak Detection, Ground Penetrating Radar GPR, Drain & Sewer Line Jetting, Inspection Cameras, Sonde, Conduit Rodders, and Utility Management Marking Equipment.