The JAWS® is one of our most recognized and appreciated pipe cleaning nozzles. Thousands of skilled pipe cleaning operators are using the JAWS® all over the globe.
The scientifically and patented designed interior minimizes the pressure drop in nozzle with 90% and assure that the water jets, moving the debris in pipe, stay together further and stronger behind the nozzle, compared with most nozzles on the market. NASSCO stated that the JAWS® was 97% efficient in cleaning, and water consumption.
A long well gather water jet do exactly what is needed to perform efficient and cost-effective pipe cleaning – increasing the speed of the water in the pipe and rapidly transport the material to the manhole- where it can be removed from pipe.
The JAWS® nozzle are made of high quality Swedish stainless steel with a protecting rubber cone. The service lifetime of the nozzle is +10 years. We have customers using the same JAWS® for +30 years. The math is simple - JAWS® will be your cheapest investment over time. Not only does it save diesel and total water consumption, but it also offers an extreme long service lifetime.
JAWS® should always be installed in a NozzTeq ® centralizing sled. We have several different sled sizes to offer that fit the inner diameter of the pipe. All sleds are made in high-quality stainless steel in our factory. The hexagon grip of the nozzle, together with JAWS® special wrench, makes it easy to remove and reinstall or change the nozzle into different sled sizes.
The JAWS® nozzle work in pipe sizes from 6”-32”, depending on the available water pump capacity. The JAWS® can be setup to operate on 3/4", 1” and 1-1/4” jetter units.*Click on the Tabs to view more information.
Connection: 3/4″
For recyclers: No
Length x diameter: 11 x 5 inches
Max working pressure: 3500 psi
Min water flow at 1450 psi: 22 us gpm
Other information: Supplied with one sled. adapter
Pipe dimension: 8″ – 10″
Rear jets: 6 x 1/8"″
Connection:
3/4" with adapter
1" NPT with adapter
1" with adapter
1 1/4"
1 1/4" NPT
Pipe dimension:
8" - 10"
10" - 12"
Jet insert type:
Stainless
Ceramic
TecSolutions Consultants is a valued supplier to the utility locating and leak detection industry in the Southwest.
If you have any questions, please call TecSolutions Consultants today at 602-830-9400. For your convenience, click here to get a free quote from this site.
Thank you for your interest in TecSolutions Consultants. We look forward to serving you in the near future.
Products Available: Pipe & Cable Locators, Leak Detection, Ground Penetrating Radar GPR, Drain & Sewer Line Jetting, Inspection Cameras, Sonde, Conduit Rodders, and Utility Management Marking Equipment.
© TecSolutions Consultants All rights reserved.
Website Design by Brymels LLC.
Service Area Back to top